 |
|
|
|
|
 |
OmniGas® Regulator Model 10 Series
Single-Stage Absolute Pressure
 Order OmniGas Regulator Model 10 Series toll-free: 866-704-6513 or Contact Us
The Model 10 pressure regulator is designed to deliver low vapor pressure gases
from liquid sources such as WF6 (boiling point of 17ºC) at a low pressure of
2 psig. It is capable of controlling a pressure adjustable from 2 psig down to a
vacuum equivalent of 100 mm Hg absolute at a flow up to 5 slm.
Features
| • |
Absolute pressure regulation provides precise negative pressure control of
high-purity gases. |
| • |
Wetted internal surfaces have a 15 micro-inch finish to reduce the tendency
to trap particulates. |
| • |
Butt-welded fittings and regulator design provide a very low helium leakage rate:
Inboard: < 2 x 10-9 atm cc/sec. Outboard: < 2 x 10-8 atm cc/sec. |
| • |
316 Stainless Steel wetted surfaces are electropolished, passivated and ultrasonically
cleaned to protect gas purity.
|
|
| General Specifications |
|
Ordering Information: |
| Maximum Inlet Pressure: 150 psig |
Gauge: 2" diameter, 316 SS |
Model 51-10AV-VCR |
| Operating Temp. Range: -40ºF to 200ºF |
Body: 316L SS |
Delivery Pressure Gauge (psig): |
| Inlet/Outlet Ports: Welded fittings |
Diaphragm: 316 SS |
30" Vac – 0 – 30 |
| Inlet/Outlet Connections: |
Seat/Seal: Tefzel®, 316L SS/Teflon® |
Cylinder Pressure Gauge (psig): |
| 1/4(M) VCR/1/4 (F) VCR |
Bonnet: Brass/nickel plated |
30" Vac – 0 – 100 |
| Flow Coefficient: Cv=0.09 |
Weight: 3.9 lbs. |
|
|
|
|
OmniGas® Regulator Model 17 Series
Single-Stage Medium Flow
Order OmniGas Regulator Model 17 Series toll-free: 866-704-6513 or Contact Us
The Model 17 single-stage regulator has a tied-diaphragm and is designed to
resist attack from strong acid forming gases. It facilitates the safe handling of corrosive,
toxic and reactive gases that have a pressure of 3,000 psig or less.
Features
| • |
Diaphragm and poppet are mechanically linked to provide a positive shutoff
should the normal regulator fail because of sucked back material or corrosion
products. |
| • |
Wetted internal surfaces have a 15 micro-inch finish to reduce the tendency to trap particulates. |
| • |
Zero clearance connections are butt-welded to the body, providing asembly
that is easily purged and installed. |
| • |
316 Stainless Steel wetted surfaces are electropolished, passivated and ultrasonically cleaned to protect gas purity. |
| • |
This series is designed to withstand an internal vacuum, providing an easily
purged assembly. |
|
| General Specifications |
|
Ordering Information: |
|
| Maximum Inlet Pressure: 3,000 psig |
Gauge: 2" diameter, 316 SS |
Model 51-17BV-VCR |
Model 51-17CV-VCR |
| Operating Temp. Range: -40ºF to 200ºF |
Body: 316L SS |
Delivery Pressure Gauge (psig): |
|
| Inlet/Outlet Ports: Welded fittings |
Diaphragm: 316 SS |
30" Vac – 0 – 60 |
30" Vac – 0 – 100 |
| Inlet/Outlet Connections: |
Seat/Seal: PCTFE, 316 SS/Teflon®, PCTFE |
Cylinder Pressure Gauge (psig): |
|
| 1/4(M) VCR/1/4 (F) VCR |
Bonnet: Brass/nickel plated |
0 - 3,000 |
0 - 3,000 |
| Flow Coefficient: Cv=0.09 |
Weight: 3.0 lbs. |
|
|
|
|
| |